Description
The SpectraPure 150 GPD MaxCap RODI System w/ Manual Flush Valve incorporates a 150gpd high-silicate removal TFC membrane, 0.5 micron MicroTec Sediment and 0.5 micron Carbon Block Filters, plus the new 33% greater capacity MAXCAP and SilicaBuster SuperDI DI Cartridges. Manual flush valve, ASO Valve and Float Valve are included, and two Dual-Probe Inline TDS Monitors measure water purity at 4 different points in the system. You can be always be assured of Zero-TDS product water. These systems maximize pure water production through application of the laboratory grade resins used in our specialty deionization cartridges, providing 99.95% Silica Removal and Extended DI Cartridge Life. Ultra-high purity DI water at a half the cost!
Features:
150 gallon per day 98% rejection* thin-film composite Reverse Osmosis Membrane
2:1 waste ratio produces 50% less waste water
– 33% larger High-Capacity SuperDIMaxCap DI Cartridge has 4 times more capacity than a typical mixed-bed DI cartridge 33% larger High-Capacity SuperDISilica-Buster DI Cartridge maximizes silica and phosphate removal Ultra-high efficiency 0.5 micron MicroTec Sediment Pre-Filter 0.5 micron Carbon Block Pre-Filter with 20,000 ppm-gallons chlorine removal capacity
Accessories Included:
Two Dual-Probe Inline TDS meters: One monitors RO Membrane performance and one monitors DI cartridge performance
Tri-color custom pressure gauge indicates when to change prefilters
Manual flush valve for longer membrane life
Automatic in-line shutoff valve saves water
In-line ball valve for manual system shut off
Float valve for unattended operation
Clear filter housings
Durable, no-rust mounting bracket
6-foot feed tubing
8-foot product and waste lines included
Housing wrench for easy filter removal
Garden hose adapter for tap water hookup
Dimensions: 20in x 7in x 16in
1 year manufacturer’s warranty
Membrane Information
90 GPD Systems = MEM-SP-0090
150/300 GPD Systems = MEM-SP-0150
Typical stabilized conductivity rejection 99%, min. conductivity rejection 98%.
Membranes produce rated GPD ± 20% at 60 psi.
Permeate flow and conductivity rejection based on 500 ppm, 77°F (25°C) softened water feed, 15% recovery and the specified applied pressure.
Warning: Spectrapure does not recommend drinking water produced from deionization (DI) as DI resins are typically not made of food grade approved material.
*RO and RODI systems that are installed areas with low feed-water pressure often require a booster pump to optimize system operation.
The correct Booster Pump to be used with SpectraPure’s Manual Membrane Flush (-MF) RO or RODI Systems is SpectraPure’s auxiliary High-Flow Booster Pump Kit P/N: BPHF-MF-115. This kit is designed specifically for use with SpectraPure Manual-Flush Systems. Other booster pump kits are not compatible with SpectraPure Manual-Flush (-MF) systems.
